1. Documents & Downloads① Qick Start Guide📧 Need help? Contact us: SUPPORT@TONORMIC.COM2. Quick Start Guide | How to Set Up and Connect Your MicrophoneLearn how to set up your microphone in seconds! This video covers:- Connecting the receiver to the correct MIC port.- Compatibility warnings (Not for AUX/Line-in).- Powering on the devices.- Adjusting volume for optimal performance.
3. Troubleshooting Sound Issues: No Sound, Low Volume, or Popping Noise
Is your microphone too quiet or making "popping" sounds? Watch this to fix it:- Port Check: Ensure you are using a MIC port, not AUX.- Connection: Make sure the receiver is fully inserted.- Mute Status: Check the indicator (Green = Unmuted / Red = Muted).- Proper Technique: Hold the mic at a 30°–45° angle to prevent popping noises.
4. How to Stop Microphone Feedback | Fix Squealing & Shrill Noises
Stop that annoying high-pitched squeal! Follow these 3 easy steps:- Mute the transmitter immediately.- Lower the volume on your speaker or amplifier.- Adjust your position: Never point the mic directly at the speaker and keep a safe distance.
5. How to Fix Intermittent Sound & Signal Cutting Out
If your audio is cutting in and out, try these solutions:- Ensure the receiver is fully plugged in.- Range: Stay within the 15-meter optimal distance.- Antenna Tip: Do not grip the power button area (antenna location). Hold the microphone by the rear tube to avoid signal interference.
6. How to Use Multiple Microphone Sets Simultaneously
Want to use more than one microphone at a time? Follow the "One-by-One" rule:- Power off all devices first.- Turn on each set (mic + receiver) one by one to ensure correct pairing.- We recommend a maximum of 7-8 sets in the same area for stability.
